Skip to content

Multi-WAN

You can access the internet simultaneously through both the 5G module and Ethernet interface, determining the priority of the two internet access methods based on different modes.

More > Network > Multi-WAN

Log in to the device management page and go to More > Network > Multi-WAN to view relevant information.

Status

After logging in to the management interface, you can view real-time information about the multi-WAN status on the homepage.

Multi-WAN provides two modes: fault recovery and load balancing, with fault recovery as the default.

Failure Recovery

In fault recovery mode, you can set interface priorities to determine the priority of the internet source. When a high-priority interface fails, it automatically switches to the lower-priority interface. Once the issue is resolved, it reverts back to using the highest-priority interface for internet access.

Interface priority

Adjust the interface priority by dragging the mouse. After the sorting is completed, click the "SAVE" button to update the interface priority setting.

Load Balancing

In load balancing mode, you can adjust the bandwidth proportion between different interfaces in overall bandwidth usage by adjusting the load ratio of interfaces.

Load ratio

Maintain stable device performance by adjusting the load ratio. Please set the load balancing strategy according to actual needs.

Status exclusion setting

By configuring the status exclusion settings, you can monitor the operating status of the 5G wireless communication module and Ethernet wired interface in real time. The following are the specific parameter configurations

If you are not familiar with these parameters, just use the default settings.