WAVLINK Travel Router-First time setup
The first setup of most wavlink routers is very similar. We provide you with tutorials for different systems. You can choose the method that suits you according to the different devices.
Tools needed : mobile phone, router.
New devices or reset devices need to log in to the administrator interface for initialization settings.
1 . Connect the ISP network cable to the wan port of the router. After successful connection, the device will automatically identify the network.
2 . Open the phone and enter the system settings, click WiFi to enter the WiFi settings page and click to turn on WiFi.
3 . Find the WiFi shown on the router on the WiFi interface (the WiFi name is recorded in the user manual, you can check the user manual to find out), and click Connect.
Tip
There is no password when connecting to WiFi for the first time.
4 . The picture after successful connection is as shown below.
There are two ways to log in to the wavlink router management interface :
Log in using the domain name http://wavlogin.link. (It is recommended that you use a domain name to log in. If you fail to log in using a domain name, please try to log in using an IP address.)
Log in using your IP address http://192.168.20.1.
About IP address(192.168.20.1)
Different devices have different IP addresses. For specific IP addresses, please refer to the specific device manual.
5 . After entering the website, click "Start Configuration" with the mouse.
6 . Select the appropriate "country/region" and "time zone",in the set password box, fill in the WiFi name you want to set (no more than 31 bytes, Chinese name maximum 10 characters, a Chinese character = three bytes) and password (8~64 characters, preferably a combination of numbers, letters, symbols).
Tip
Device management password : Used to log in to the device management interface. Please remember your password. If you forget the password, you can press and hold the device "Reset" button for 6s to restore the factory settings.Please note that doing this will clear all settings you have previously made.
7 . Click "Save" and wait for the Settings to be applied. When the progress bar reaches 100%, click "Refresh" button to jump to the device login page.
8 . After the initialization settings are completed, enter the device management password you set to log in to the system management interface to start exploring your wavlink device.
Forgot password solution
Please press and hold the reset button on the router for more than 6 seconds. After the router reset, you can log in with the default password.
Tools needed : mobile phone, router.
New devices or reset devices need to log in to the administrator interface for initialization settings.
1 . Connect the ISP network cable to the wan port of the router. After successful connection, the device will automatically identify the network.
2 . Open the phone and enter the system settings, click WiFi to enter the WiFi settings page and click to turn on WiFi.
3 . Find the WiFi shown on the router on the WiFi interface (the WiFi name is recorded in the user manual, you can check the user manual to find out), and click Connect.
Tip
There is no password when connecting to WiFi for the first time.
4 . The picture after successful connection is as shown below.
There are two ways to log in to the wavlink router management interface :
Log in using the domain name http://wavlogin.link. (It is recommended that you use a domain name to log in. If you fail to log in using a domain name, please try to log in using an IP address.)
Log in using your IP address http://192.168.20.1.
About IP address(192.168.20.1)
Different devices have different IP addresses. For specific IP addresses, please refer to the specific device manual.
5 . After entering the website, click "Start Configuration" with the mouse.
6 . Select the appropriate "country/region" and "time zone",in the set password box, fill in the WiFi name you want to set (no more than 31 bytes, Chinese name maximum 10 characters, a Chinese character = three bytes) and password (8~64 characters, preferably a combination of numbers, letters, symbols).
Tip
Device management password : Used to log in to the device management interface. Please remember your password. If you forget the password, you can press and hold the device "Reset" button for 6s to restore the factory settings.Please note that doing this will clear all settings you have previously made.
7 . Click "Save" and wait for the Settings to be applied. When the progress bar reaches 100%, click "Refresh" button to jump to the device login page.
8 . After the initialization settings are completed, enter the device management password you set to log in to the system management interface to start exploring your wavlink device.
Forgot password solution
Please press and hold the reset button on the router for more than 6 seconds. After the router reset, you can log in with the default password.
1 . Tools required : Desktop/laptop, two Ethernet cables, router, Ethernet converter
2 . Connection methods : wireless connection and wired connection.Whether it is a wired connection or a wireless connection, you need to power on the device and connect the Ethernet cable to the wan port of the router. As shown below.
(this status of the icon indicates that the computer is not connected to the network), and a wireless connection pop-up window will appear,enable the WiFi function ,find your default WiFi name and click to connect to WiFi.
Default WiFi name
The default WiFi name can be found in the user manual or the product bottom label.
SSID(Click to learn about SSID) : WAVLINK_XXXX
"XXXX" in SSID is for illustrative purposes only, please refer to the last 4 digits of the MAC address of the label on the bottomof the product.
① To use wired access to the Internet, connect an Ethernet cable between the router's wan port and the Ethernet port on your computer. If your computer doesn't have an Ethernet port, try using a USB to Ethernet adapter.
② Connect one end of the first network cable to the network port of the computer, the other end to the LAN port of the router, and the second ISP network cable to the wan port of the computer.The device will automatically identify the network.
③ After successful connection, this icon " 
" will be displayed on the computer taskbar.
3 . New devices or reset devices need to log in to the administrator interface for initialization settings.
4 . There are two ways to log in to the wavlink router management interface :
Log in using the domain name http://wavlogin.link. (It is recommended that you use a domain name to log in. If you fail to log in using a domain name, please try to log in using an IP address.)
5 . After entering the website, click "Start Configuration" with the mouse.
Log in using your IP address http://192.168.20.1.(If you want to log in using your IP address, please refer to the steps below.)
5 . After entering the website, click "Start Configuration" with the mouse.
About IP address(192.168.20.1)
Different devices have different IP addresses. For specific IP addresses, please refer to the specific device manual or the actual acquisition of the device.For the actual method of obtaining an IP address, refer to the following steps.
Click here to learn how to obtain the IP address of your router.
1 . Click win 
, the navigation bar will pop up,click settings 
in the navigation bar to enter the computer settings page, and click WiFi on the settings page.
2 . Click Show available networks to pop up the following interface, find the device's default WiFi name and click Connect.(The default WiFi name can be found in the user manual or the product bottom label.)
3 . This icon will be converted to this icon 
after the connection is successful.Enter the WiFi settings page, click on the Connected WiFi column to enter the WiFi detailed information interface.
4 . Find the IPv4 DNS Server connected to WiFi, copy the IP address, and paste the IP address in the address bar of the browser to enter the router management interface.
1 . Move the mouse to " " on the computer taskbar and right-click.
2 . Select Go to Settings, click Ethernet, and view the IPv4 DNS Servers.
3 . Press and hold the left button of the mouse to select the IP address, then right-click and select Copy.
4 . Double-click the browser icon, open the browser (Microsoft edge, Google, etc.), and paste the IP address you just copied in the address bar, or manually enter http://192.168.x.x .
6 . Select the appropriate "country/region" and "time zone",in the set password box, fill in the WiFi name you want to set (no more than 31 bytes, Chinese name maximum 10 characters, a Chinese character = three bytes) and password (8~64 characters, preferably a combination of numbers, letters, symbols).
Tip
Device management password : Used to log in to the device management interface. Please remember your password. If you forget the password, you can press and hold the device "Reset" button for 6s to restore the factory settings.Please note that doing this will clear all settings you have previously made.
7 . Click "Save" and wait for the Settings to be applied. When the progress bar reaches 100%, click "Refresh" button to jump to the device login page.
8 . After the initialization settings are completed, enter the device management password you set to log in to the system management interface to start exploring your wavlink device.
Forgot password solution
Please press and hold the reset button on the router for more than 6 seconds. After the router reset, you can log in with the default password.
1 . Tools required: Wavlink router, Apple computer, network cable, Ethernet converter, Ethernet cable.
2 . Connection methods: wireless connection and wired connection.Whether it is a wired connection or a wireless connection, you need to power on the device and connect the Ethernet cable to the wan port of the router. As shown below.
➡ 
, enter the WiFi settings page to enable the WiFi function.
Or click the icon 
on the system bar to enable the WiFi function.
Default WiFi name
The default WiFi name can be found in the user manual or the product bottom label.
SSID(Click to learn about SSID) : WAVLINK_XXXX
"XXXX" in SSID is for illustrative purposes only, please refer to the last 4 digits of the MAC address of the label on the bottomof the product.
② After the connection is successful, the device will automatically identify the network.
3 . New devices or reset devices need to log in to the administrator interface for initialization settings.
4 . There are two ways to log in to the wavlink router management interface :
Log in using the domain name http://wavlogin.link. (It is recommended that you use a domain name to log in. If you fail to log in using a domain name, please try to log in using an IP address.)
5 . After entering the website, click "Start Configuration" with the mouse.
Log in using your IP address http://192.168.20.1.(If you want to log in using your IP address, please refer to the steps below.)
5 . After entering the website, click "Start Configuration" with the mouse.
About IP address(192.168.20.1)
Different devices have different IP addresses. For specific IP addresses, please refer to the specific device manual or the actual acquisition of the device.For the actual method of obtaining an IP address, refer to the following steps.
Click here to learn how to obtain the IP address of your router.
1 . Click win , the navigation bar will pop up,click settings in the navigation bar to enter the computer settings page, and click WiFi on the settings page.
2 . Click Show available networks to pop up the following interface, find the device's default WiFi name and click Connect.(The default WiFi name can be found in the user manual or the product bottom label.)
3 . This icon will be converted to this icon after the connection is successful.Enter the WiFi settings page, click on the Connected WiFi column to enter the WiFi detailed information interface.
4 . Find the IPv4 DNS Server connected to WiFi, copy the IP address, and paste the IP address in the address bar of the browser to enter the router management interface.
1 . Move the mouse to " " on the computer taskbar and right-click.
2 . Select Go to Settings, click Ethernet, and view the IPv4 DNS Servers.
3 . Press and hold the left button of the mouse to select the IP address, then right-click and select Copy.
4 . Double-click the browser icon, open the browser (Microsoft edge, Google, etc.), and paste the IP address you just copied in the address bar, or manually enter http://192.168.x.x .
6 . Select the appropriate "country/region" and "time zone",in the set password box, fill in the WiFi name you want to set (no more than 31 bytes, Chinese name maximum 10 characters, a Chinese character = three bytes) and password (8~64 characters, preferably a combination of numbers, letters, symbols).
Tip
Device management password : Used to log in to the device management interface. Please remember your password. If you forget the password, you can press and hold the device "Reset" button for 6s to restore the factory settings.Please note that doing this will clear all settings you have previously made.
7 . Click "Save" and wait for the Settings to be applied. When the progress bar reaches 100%, click "Refresh" button to jump to the device login page.
8 . After the initialization settings are completed, enter the device management password you set to log in to the system management interface to start exploring your wavlink device.
Forgot password solution
Please press and hold the reset button on the router for more than 6 seconds. After the router reset, you can log in with the default password.
Setup complete! Still have questions? Please don’t hesitate to email contact@wavlink.com to provide feedbacks or contact online customer service, thank you !